Epson SureLab D1070 Professional Minilab Printer - Manual (Page 172)

SL-D1000 Series User's Guide
Appendix
172
*3 EpsonNet Print supports IPv4 only. The others support both IPv4 and IPv6.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
For European users
Radio Equipment Information:
This product intentionally emit radio wave described as follows.
(a) frequency band in which the radio equipment operates; 2.4 to 2.4835GHz
(b) maximum radio-frequency power transmitted in the frequency band in which the radio equipment operates;
20dBm (eirp power)
Roll paper unit Specifications
Loadable sizes 3-inch roll core
Outside diameter of 6.7 inches (170 mm) or less
One roll can be loaded
Roll paper width 3.5 inches (89 mm), 4 inches (102 mm), 5 inches (127 mm), 6 inches (152 mm), 8 inches (203 mm),
A4 (210 mm)
Roll paper thickness 0.0086 to 0.0098 inches (0.22 to 0.25 mm)
Paper feed unit Specifications
Paper Width 3.5 to 8.26 inches (89 to 210 mm)
Paper Height 5.8 to 39.37 inches (148 to 1000 mm)
Paper Thickness 0.008 to 0.02 inches (0.20 to 0.50 mm)
Output tray Specifications
Capacity Roll Paper:
4 x 6 in (10 × 15 cm) 50 sheets
Length 8 in (203 mm) or less 50 sheets
Length 8.1 in (203.1 mm) to 12 in (305 mm) 20 sheets
Cut sheet:
Length 12 in (305 mm) or less 20 sheets
Paper Size Standard size:
A4 (210×297 mm) or less
Non-standard size:
Width 3.5 in (89 mm) to A4 (210 mm), length: 1.9 in (50 mm) to 12 in (305 mm)
Ink Specifications
Type Ink supply unit
Ink type Six color water-based dye
Use by date Three years after manufacture