Kurzweil Forte - Manual (Page 80)

Program Mode
Selecting Programs
6-6
If the User button LED is not lit, the Alpha Wheel or the Previous (-) and Next (+) buttons
will move through the Program list of each Category, showing both factory and User programs
for each Category. If the User button LED is lit, the Alpha Wheel or the Previous (-) and Next
(+) buttons will move through the Program list of each Category, showing only User programs
for each Category. When the highest or lowest Program is reached, the list will wrap back to
the first or last Program, respectively.
Value Jump Buttons
In Program Mode, the Value Jump double button press selects the first Program of each
Category, as well as the Category Default Program of each Category (if a Category Default
Program has been set). For more information on choosing a new Category Default Program
for each Category, see Choosing Category Default Programs . If the User button is selected,
Value Jump works the same way.
Category Buttons
The Category buttons allow you to select Programs by instrument type simply by pressing a
button. You can select one Category button at a time and the current Category button’s LED
is lit.