Kurzweil Forte - Manual (Page 263)

Multi Edit Mode
MAIN Page
11-12
Midi Bank
The MIDI Bank parameter determines the MIDI Bank change message that the currently
selected Zone sends when the Multi is loaded. You can set this parameter to a MIDI Bank
change message from 0 to 16383.
When using the Forte as a MIDI controller, sending a MIDI Bank change message (along
with a MIDI Program change message) when a Multi is loaded ensures that the Program
loaded on the other sound modules in your MIDI chain is the Program that you want.
For example, if you’ve configured a Multi to work in a specific way with Program 32 in
Bank 5 of a connected sound module, then set MIDI Bank to 5 and MIDI Program to 32.
This way, whenever you load this Multi, the sound module will automatically load Program
32 in Bank 5. Pressing both Previous & Next buttons simultaneously will set this parameter
to the Bank number of the currently selected Local Program.
NOTE : When you change the Program parameter, the MIDI Bank and
MIDI Program parameters will automatically change to match the
Bank and Program numbers of the Program that you select for Local
P o
a o e a ple i yo choose P o a then MIDI Bank
will change to 1 and MIDI Program will change to 50.
Midi Program
The MIDI Program parameter determines the MIDI Program change message that the
currently selected Zone sends when the Multi is loaded. You can set this parameter to a
MIDI Program change message from 0 to 127.
When using the Forte as a MIDI controller, sending a MIDI Program change message
(along with a MIDI bank change message) when a Multi is loaded ensures that the Program
loaded on the other sound modules in your MIDI chain is the Program that you want. For
example, if you’ve configured a Multi to work in a specific way with Program 32 in Bank 5
of a connected sound module, then set MIDI Bank to 5 and MIDI Program to 32. This
way, whenever you load this Multi, the sound module will automatically load Program 32 in
Bank 5.
NOTE : When you change the Program parameter, the MIDI Bank
and MIDI Program parameters will automatically change to match the
Bank and Program numbers of the Program that you select for Local
P o
a o e a ple i yo choose P o a then MIDI Bank
will change to 1 and MIDI Program will change to 50.