Kurzweil Forte - Manual (Page 220)

The Effects Chain Editor
Effects Parameters
8-26
Crossover1 and 2 are the two Crossover frequencies at which the band-split filters split the
signal into three bands. The two parameters are interchangeable: either may have a higher
frequency than the other. Range is 16 to 25088 Hz.
Pan
[High/Mid/Low] sets the pan position for each band. Range is -100% (fully left) to
100% (fully right.)
Delay
[High/Mid/Low] sets the delay for each band. Range is 0 to 1000 ms.
Stereo Image
This effect provides enhancement for a stereo signal. It also features a stereo correlation meter.
It uses some parameters from Mono to Stereo and some from Stereo Analyze (following).