Kurzweil Forte - Manual (Page 193)

Program Edit Mode
KB3 Editor: The EQ Page
7-96
PercLevel, DecayTime, OrgLevel
Parameter Group (Available for each combination of
the Volume and Decay parameters on the PERC page)
Range of Values
Percussion Level 0 to 24.0 dB
Decay Time 0.01 to 5.10 seconds, in 0.02-second increments
Organ Volume Level -12.0 to 12.0 dB
With these parameters you can control the amplitude and decay time of the percussion
effect for all combinations of the PERC page Volume and Decay parameter settings. You can
also adjust the level of the organ relative to the percussion, for accurate emulation of classic
organs.
KB3 Editor: The EQ Page
The four column headers on this page represent two shelving bands of equalization and
two parametric bands. The KB3 EQ offered here, though, is not implemented as a true EQ
section; instead, it adjusts the volume of the tone wheels based on frequency. If the tone
wheels are based on sine waves, then this acts similarly to a real EQ.
Parameter Group (Available for each EQ band) Range of Values
Gain -24.0 to 24.0 dB, in 0.2-dB increments
Frequency 16 to 25088 Hz, in varying increments
Width -128 to 128 Semitones, in 2-semitone increments
Each EQ section has Gain (G), Frequency (F), and Width (W) controls. Frequency
controls the center frequency of the band. Width controls the bandwidth. Gain controls the
amount of boost or cut.