Kurzweil Forte - Manual (Page 257)

Multi Edit Mode
Zone Parameters
11-6
Zone Parameters
Each of the Zones in a Multi has multiple parameters that determine its behavior. Since the
Zones of a Multi are independent of each other, changing a parameter for a certain Zone will
not affect the parameters of any other Zone. There are some exceptions to this, for example,
the parameters on the Common Page are common to all Zones. Also, on the Controllers
Page for Switch Controllers, the parameters Type, Entry State, and Exit State are common to
all Zones. Lastly, on the Controllers Page for Continuous Controllers, the parameters Entry
Position and Exit Value are common to all Zones.
The top right corner of the display of the MAIN & CONTROLS pages shows the currently
selected Zone out of the total number of Zones, or “All Zones” if the parameter applies to all
Zones.
The Zone parameters for each page are explained in detail below.
OVERVIEW Page
The Overview Page shows four Zones in an easy graphical layout. The current Program,
Volume and Panning position of the Zone, along with the state and active keyboard region
can be quickly set on this page.
OVERVIEW Page Parameters
Parameter Range Of Values Default Value
Status Active, Muted Active
Program Program List -
Key Range C-1 to G9 C-1 to G9
Pan None, 0 to 127 64
Volume None, 0 to 127 127