Enhancers, Eq morpher, Compressors, expanders, and gates – Kurzweil Forte User Manual
Page 208: Enhancers -14 eq morpher -14, Compressors, expanders, and gates -14
The Effects Chain Editor
Effects Parameters
8-14
Midn Gain
sets the cut or boost for the parametric band n, with a range of -79 to +24 dB.
Midn Freq sets the center frequency for parametric band n, with a range of 16 to 25088 Hz,
in increments of a semitone.
Midn Width
set the bandwidth of the filter on band n, with a range of 0.01 to 5 octaves.
Enhancers
Enhancers modify the spectral content of the input signal by boosting existing spectral
content, or stimulating new ones. Two and three-band versions are provided.
Drive
adjusts the input into each band. Increasing the drive will increase the effects. Range is
-79.0 to 24.0 dB.
Xfer
adjusts the intensity of the transfer curves. Range is -100 to 100%.
EQ Morpher
This effect uses two four-band bandpass filters, A and B, and moves between them. This can
produce very convincing human vocal type sounds.
FreqScale
offsets the filter frequencies for each set of filters. After setting the filter parameters
(Freq, Gain, and Width), the FreqScale parameters will move each of the four filter
frequencies together by the same relative pitch. Range is -8600 to 8600 cents.
Morph A>B
. When set to 0% the “A” parameters are controlling the filters, and when set
to 100%, the “B” parameters control the filters. Between 0 and 100%, the filters are at
interpolated positions. When morphing from A to B settings, the A filter #1 will change to
the B filter #1, A filter #2 moves to B filter #2, and so on. Range is 0 to 100%.
Compressors, Expanders, and Gates
A wide range of Compression and Expansion effects is available in the Forte. The various
effects include different combinations of:
• compressors with soft-knee characteristic—the compression action comes in gradually
as the signal level approaches the threshold
• compressors with hard-knee characteristic—the compression action comes in
abruptly when the signal reaches the threshold
• expanders
• multiband compressors that break the signal up into three frequency bands and
compress them all separately
• sidechains or output EQs
• reverbs and compressors in combination
• gates
• gated reverbs