Kurzweil Forte - Manual (Page 253)

Multi Edit Mode
About Multi Edit Mode
11-2
Once you are in Multi Edit Mode, press the soft buttons at the bottom of the screen
to navigate to each of the Multi Edit Mode pages. See the sections below for details on
navigating and changing parameters and Zones. All parameters apply only to the currently
selected Zone, except for parameters on the Common Page and certain controller parameters,
which apply to all Zones. On the Controls page, if a parameter is selected which applies to all
Zones, “All Zones” will be displayed in the top right corner of the display.
User Type: Advanced
This Chapter describes Multi Edit Mode when the Global Mode “User Type” parameter is set
to “Regular.” When User Type is set to Advanced, Multi Edit Mode behaves the same way,
except you are able to access up to 16 Zones by using the Channel/Zone up/down buttons.
On the Multi Edit Overview page, Zones will be shown in groups of 4: 1-4, 5-8, 9-12 and
13-16. When User Type is set to Regular (the default), Multi Edit Mode can access 4 Zones.
For both User Type settings, a Multi can have a minimum of 4 Zones.
When User Type is set to Advanced, additional soft buttons appear in Multi Edit Mode.
Additional Zone function soft buttons include NEWZN (new Zone), DUPZN (duplicate
Zone) which duplicates the currently selected Zone, IMPZN (import Zone) which allows
you to import a Zone from any Multi, and DELZN (delete Zone) which will delete the
currently selected Zone. New, duplicated or imported Zones are added after the highest
numbered Zone of the Multi. A Multi can have a minimum of 4 Zones and a maximum of
16 Zones.
The ARPSAV, DELETE, and HELP soft buttons also appear. ARPSAV allows you to save
the arpeggiator settings of the current Zone as an arpeggiator preset. DELETE allows you to
delete the current Multi (if it is a User Multi).