Show controllers, Auto power off, Power off time – Kurzweil Forte User Manual
Page 294: Clock source, Is set to i
Global Mode
MAIN1 Page
12-4
Show Controllers
When “Large” or “Favorites” view is selected for the Display parameter (see above), the
Program and Multi Mode main pages can briefly show controller assignments and values
when a controller is moved. Set this parameter to No to hide controller assignments. Set it
to Yes to briefly show controller assignments when a controller is moved (Sliders, Switch
buttons, and Wheels, but not Pedals or Pressure). Set it to Yes (Incl. pedals) to show all
controllers, including Pedals and Pressure.
Auto Power Off
The auto power off parameter turns the power saving feature on. When the Auto Power Off
parameter is set to On, the Forte will automatically power off after the Power Off Time has
expired, from the last key press (physical or MIDI), button press, controller movement, or
USB MIDI activity.
Power Off Time
If the Auto Power Off parameter is set to On, then the Forte will power off after the time
selected by the Power Off Time parameter has elapsed. The Forte will display the following
warnings before powering off. Press a key or move any Forte control to dismiss the warning
message. After dismissing this message, the Forte will wait the selected amount of time before
showing this warning again.
Clock Source
With the Clock Source parameter set to Internal, Forte plays using its own Tempo. If you
wish to sync the Forte to the tempo of an external device, use the External setting.