Kurzweil Forte - Manual (Page 331)

System Mode
14-1
Chapter 14
System Mode
CAUTION: DO NOT ATTEMPT TO MAKE ANY CHANGES IN SYSTEM
MODE UNTIL YOU HAVE READ AND FULLY UNDERSTOOD THIS
CHAPTER
This chapter will help you familiarize you with the functions of System Mode.
System Mode allows you to manage and upgrade the OS software of your Forte as well as
perform diagnostic tests of the instrument’s various internal systems and processes. Note that
the functions that you have access to in System Mode govern the operation of your Forte, so
only use System Mode when you must perform essential maintenance tasks.
To enter System Mode, follow these steps:
1. Power off your Forte.
2. Press and the hold the ENTER button, and power on the unit. Make sure to keep
holding the ENTER button until “Entering System Mode” is displayed:
3. Release the ENTER button—at this point, you are in System Mode.