Kurzweil Forte - Manual (Page 295)

Global Mode
MAIN1 Page
12-5
Out Pair B Mode
The B Audio Outputs can either be used as a second set of stereo (auxiliary) outputs by
setting this parameter to “Normal” or they can be used to mirror the main A Audio Outputs
by setting this parameter to “Mirror Primary Outputs”. By default this parameter is set to
Normal.
Audio Out S/M
The audio outputs are normally used as a stereo pair; however, the Forte can be operated
in Mono mode by plugging an audio cable into the Left “A” Audio Output, and nothing
into Right Output. Setting this parameter to Auto allows the Forte to detect the audio
connections and adjust to mono output if required. The parameter can be set to Stereo, to
force the Forte to always output a stereo signal and ignore the audio output detection. By
default this parameter is set to Auto.
Multi Controllers
When a multi is selected, this parameter determines how the sliders respond to movement.
When set to instant, moving a slider will result in the assigned parameter immediately
jumping to the slider position. With some parameters an abrupt change to the sound may
be undesirable. In this case set this parameter to PassEntry and the slider will only become
active when the slider is moved past the Multi Entry Value. This results in smooth changes to
the sound.