Kurzweil Forte - Manual (Page 115)

Program Edit Mode
The COMMON Page
7-18
The COMMON Page
The Common Page allows adjustment of a number of general parameters for the program.
Notice that when the Monophonic parameter is set to its default value of Off, the four
monophonic parameters do not appear on the page. Some global parameters will only appear
when the global User Type is set to Advanced.
Parameter Range Of Values Default Value
BendRange Up -7200 cents to +7200 cents 200 ct
BendRange Down -7200 cents to +7200 cents -200 ct
Output Gain -96 to 24dB 0dB
Category None, 20 Categories per program
Intonation Map 0-127 None (0)
Intonation Key C - B C
Monophonic Off, On Off
Legato Off, On On
Portamento Off, On On
Portamento Rate 1-3000 Key/s 70 Key/s
Mono Sample XFade Off, On On
COMMON Page Parameters
BendRange Up & BendRange Down
Use these parameters to define how much the pitch will change when you move the Pitch
Wheel. You can set either Bend parameter to bend by up to 72 half-steps up or down. Pitch
values are set in cents, where 100 cents = 1 half-step (1 semitone).