Kurzweil Forte - Manual (Page 297)

Global Mode
MAIN1 Page
12-7
Show Zone Info
When this parameter is set to Yes, the Multi Mode selection page will show information for
each of the Zones in the currently selected Multi.
The Multi select page will show information for 4, 8 or 16 Zones at a time, depending on the
number of Zones in the selected Multi. If the selected Multi has 4 Zones or less, the Multi
select page will show the information below. If the selected Multi has more than 4 Zones,
some of this information will not be displayed.
• Zone Solo status: The Solo icon turns white for any not soloed Zone. The Solo icon
turns red for any soloed Zone.
• Zone On status: The On icon turns white for any Zone that is not active (muted).
The On icon turns green for any Zone that is active (not muted) if it has a MIDI
destination which includes LOCAL. The On icon turns orange for any Zone that is
active (not muted) if it has a MIDI destination which does not include LOCAL.
• Zone MIDI Output status: The MIDI Output icon has a symbol for USB (on
the left) and standard MIDI 5-pin DIN (on the right). This icon changes color
depending on the MIDI destination of each Zone. If the Zone has no USB or MIDI
output selected for Destination, the icon turns white. If the Zone has USB and/or
MIDI selected for Destination, the corresponding left and/or right side of the icon
turns green.
• Zone A B Audio Output setting: The A B Audio Output icon shows the Audio
Output setting of each Zone. This icon corresponds with the Output parameter on
the Multi Edit MAIN page. If Output is set to Auto, both sides of the icon (A and
B) turn green. If Output is set to A, the left side of the icon (A) turns green, and the
right side (B) turns white. If Output is set to B, the left side of the icon (A) turns
white, and the right side (B) turns green.
• Zone Key Range: The Key Range icon shows an overview of the Key Range settings
for each Zone.
• Zone Program ID number and name: The Program ID number and name of each
Zone is displayed.
• CC7 (MIDI Channel Volume): The CC7 icon shows the value of MIDI continuous
controller 7 for each Zone’s MIDI channel. In each MIDI channel, CC7 controls
the overall program output volume. The height of the green bars in the CC7 icon
corresponds with the CC7’s current value, giving you an overview of the volume of
each Zone. For factory Multis, CC7 is assigned to Sliders A-D for Zones 1-4.
• CC11 (MIDI Expression Level): When the Global Mode Main 1 Show Controllers
parameter is set to Yes (Incl. pedals), the CC11 icon appears. The CC11 icon shows
the value of MIDI continuous controller 11 for each Zone’s MIDI channel. In
each MIDI channel, CC11 controls the pre-insert FX program level (also known as
Expression Level). The height of the green bars in the CC11 icon corresponds with
the CC11’s current value, giving you an overview of the Expression Level of each
Zone. For factory Multis, CC11 is often assigned to the CC1 pedal.