PLANET MH-2300 - Manual (Page 71)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
71
Step 4. Go to Network > Interface Group and then set as shown below:
Select “Group 1” for Port1 (WAN1), Port2 (LAN1) and Port3 (LAN2).
„ Click
OK.
„
Configuring the Interface Group Settings
The LAN users from within the same subnet may be categorized by their
department using the NIC ports. For example, sales department is connected to
LAN 1 (Port 2) and customer support department is connected to LAN 2 (Port 3).