PLANET MH-2300 - Manual (Page 191)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
191
Step 9. Under Policy Object > VPN > Trunk, set as shown below:
„ Name: Specify a name for the VPN trunk.
„ Local Settings: Select “LAN” for Interface and specify the subnet
and netmask of Company A.
„ Remote Settings: Select Remote Client.
„ Tunnel Selection: Select “VPN_A” from the Available Tunnels
column on the left and then click Add.
„ Tick the box of “Enable NetBIOS Broadcast over VPN”.
„ Click
OK to complete the settings.
Add a VPN Trunk
VPN Trunk Successfully Added