beautypg.com

PLANET MH-2300 User Manual

Page 279

background image

Gigabit Multi-Homing VPN Security Gateway

MH-2300

279

Step 3. Under Policy Object > VPN > Trunk, click New Entry and then set as

shown below:
„ Specify a name for the VPN trunk.
„ Local Settings: Select “LAN” for Interface and specify the subnet

and netmask of Company A.

„ Remote Settings : Specify the subnet and netmask of Company

B.

„ Select “PPTP_Server_PPTP_01” from the Available Tunnels

column on the left and then click Add.

„ Tick the box of “Enable NetBIOS Broadcast over VPN”.
„ Click

OK to complete the settings.

Adding a VPN Trunk

VPN Trunk Successfully Added

When specifying the Remote IP Address / Netmask for a PPTP VPN trunk, it
merely takes a PPTP VPN tunnel to meet the requirement.

See also other documents in the category PLANET Communication: