PLANET MH-2300 - Manual (Page 161)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
161
Step 3. Add a service setting under Policy Object > Service > Custom as
follows:
The Service Setting for VoIP Communication
Step 4. Under Policy Object > Virtual Server > Port Mapping, set as shown
below:
„ Name : Specify a name for the port mapping setting.
„ Public IP Address:
Select “Port 2 (WAN1)” from the
corresponding drop-down list and then specify “61.11.11.12” in the
field, or click
Assist Me to select an addresss.
„ Service: Select the custom service.
„ External Service Port is defaulted.
„ Load Balancing: Select “Round-Robin”.
„ Interface: Select “LAN”.
„ Private IP Address # 1: Specify “192.168.1.100” in the field or
click Assist Me to select an address.
„ Click
OK.
Creating a Port Mapping Rule
The Mapping Rule for the VoIP Service
The External Service Port allows modification if there is only one port being
used for providing the service.