PLANET MH-2300 - Manual (Page 53)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
53
(192.168.1.1).
Specify a static route from 192.168.2.x/24 to 192.168.1.2 (WAN 1).
Configure Port2 as LAN1 (Transparent Routing mode) and connect it to the
LAN subnet 192.168.1.x/24 (with the gateway set to 192.168.1.1) for providing
LAN users with Internet access.
Configure Port3 as LAN2 (192.168.2.1 in NAT Routng mode to connect it to the
LAN subnet 192.168.2.x/24 for providing LAN users with Internet access (with
the gateway set to 192.168.2.1). LAN PCs may use the original IP to access the
Internet.
The two LAN subnets are interconnected through network policies.
Step 1. Go to Network > Interface and then set as shown below:
„ Click Modify corresponding to Port 2.
„ Select “LAN” for Interface Type.
„ Select “Transparent Routing” for Connection Type.
„ Tick the boxes of “Ping/ Tracert”, “HTTP” and “HTTPS”.
„ Click
OK.
Configuring the LAN Interface Settings