PLANET MH-2300 - Manual (Page 199)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
199
IP Security Policy Wizard Successfully Completed
Step 2. In the VPN_B Properties dialog box, click the Rules tab and then set
as shown below:
„ Untick the box of “Use Add Wizard” and click Add.
„ In
the New Rule Properties dialog box, click the IP Filter List tab
and then click Add:
‹ In the IP Filter List dialog box, type “VPN_B Local To
Remote” in the Name field and then click Add:
z In the IP Filter Properties dialog box, click the
Addresses tab:
¾ Source address: Select “A specific IP Address or
Subnet” and specify the corresponding IP address
or subnet, ie., 211.22.22.22/32.
¾ Destination address: Select “A specific IP Address
or Subnet” and specify the corresponding IP
address or subnet, i.e., 192.168.10.0/24.
¾ Click
OK.
z Click OK to complete the settings.
‹ Select “VPN_B Local To Remote” from IP Filter Lists.
„ In the New Rule Properties dialog box, click the Filter Action tab,
untick the box of “Use Add Wizard” and then click Add:
‹ In the New Filter Action Properties dialog box, click the
Security Methods tab and then set as shown below:
z Select the radio box of “Negotiate security”.