PLANET MH-2300 - Manual (Page 44)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
44
Priority
„ The priority of a WAN interface in the connectivity.
Terms in Interface Group
Interface Group
„ Allows for physically isolating network interfaces by NIC teaming. The
feature is intended for a scenario that runs in Transparent Bridging mode
and accesses the Internet via a static IP.
„ Allows for translating private addresses (LAN or DMZ) to a public address
when running in Transparent Bridging mode.
3.1.1 Examples of Interface
3.1.1.1 Modifying the LAN Interface (in NAT Routing Mode)
Prerequisite Configuration (Note: The IP addresses are used as examples
only)
Configure Port 1 as LAN 1 (192.168.1.1 in NAT Routing mode)
Step 1. Under Network > Interface, set as shown below:
„ Click
Modify corresponding to Port 1.
„ Select “LAN” for Interface Type.
„ Select “NAT Routing” for Connection Type.
„ Specify
the IPv4 Address and Netmask.
„ Tick the boxes of “Ping/ Tracert”, “HTTP” and “HTTPS”.
„ Click
OK.
Modifying the LAN Interface Settings