PLANET MH-2300 - Manual (Page 252)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
252
Step 14. Below
Encryption and Data Integrity Algorithms, select “3DES”
for Encryption Algorithm; select “MD5” for Authentication
Algorithm; select “DH 1” for Key Group.
ISAKMP Algorithm Settings
Step 15. Select
Use both algorithms below the IPSec Algorithm, or tick
Use authentication algorithm only. If ticked Use both algorithms,
please select “3DES” for Encryption Algorithm and “MD5” for
Authentication Algorithm.
IPSec Algorithm Settings
Step 16. Select “Group 1” for PFS Key Group. Enter “3600” in the ISAKMP
SA Lifetime field and “28800” in the IPSec SA Lifetime field and then
select “Main Mode” for Mode.
Advanced Settings of IPSec Autokey
Step 17. For
GRE Tunnel Settings, type “192.168.60.200” in the Local
Endpoint Address field and “192.168.60.100” in the Remote
Endpoint Address field. (Note: The local IP and the remote IP must
be configured in the same class C network.)
GRE Tunnel Settings
Step 18. Settings
completed.
IPSec Autokey Settings Completed