PLANET MH-2300 - Manual (Page 371)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
371
1. The Traffic Grapher requires manual activation for each network policy,
respectively.
2. By traffic direction, statistical graphs are categorized into six types, namely
outgoing, incoming, WAN-to-DMZ, LAN-to-DMZ, DMZ-to-WAN, DMZ-to-LAN,
LAN-to-LAN, and DMZ-to-DMZ.
3. The statistical graphs from a specific time can be obtained by using the
date and time pickers (drop-down lists) and the Refresh button.
8.3 Diagnostic Tools
The device provides Ping and Traceroute commands as well as a
Web-based packet capture tool to help diagnose network issues with particular
internal or external nodes.
8.3.1 Ping
Step 1. To test whether a host is reachable across an IP network, go to
Monitoring > Diagnostic Tools > Ping and then configure as shown
below:
„ Destination IP / Domain name : Type the Destination IP or
Domain name.
„ Packet Size : Configure the size of each packet. (32 Bytes by
default)
„ Count : Configure the quantity of packets to send out. (4 by
default)
„ Wait Time : Specify the duration to wait between successive pings.
(1 second by default)
„ Select the interface from the Interface drop-down list.
„ Click
OK.
The Parameters for Pinging a Host