PLANET MH-2300 - Manual (Page 267)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
267
Step 8. Setting completed.
IPSec Setting Completed
Step 9. Under Policy Object > VPN > Trunk, click the New Entry button and
then set as shown below:
„ Type the name in the Name field.
„ Local Settings: Select LAN. Local IP / Netmask: Enter the
subnet and the mask.
„ Under
the Remote Settings section, select Remote IP / Netmask
and then enter the subnet and mask.
„ Move VPN_01 from the Available Tunnels column to the
Selected Tunnels column.
„ Tick Enable NetBIOS Broadcast over VPN.
„ Click OK.
Configuring the Trunk