PLANET MH-2300 - Manual (Page 18)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
18
Confirming to Log Out
Step 3. A message is shown after confirming the logout.
The Logout Message
2.1.4 Software Update
Step 1. To run a software update, go to System > Administration > Software
Update and follow the steps below:
„ Click
Browse to locate the software.
„ Click OK to proceed the update.
Updating the Software
The update takes several minutes to run through and is followed by a reboot.
During the process, DO NOT TURN OFF THE POWER, DISCONNECT THE
INTERNET, or CLOSE THE BROWSER. Any of the three will cause
unexpected errors to the system.Therefore, running the update locally is
strongly recommended.
2.2 Configuration
This chapter will cover the configuration of Settings, Date / Time, Multiple
Subnets, Routing Table, DHCP, Dynamic DNS, Host Table, and Language.
Terms in Settings
System Settings
„ Allowed for importing / exporting the system configuration file and resetting
system to factory default settings.