PLANET MH-2300 - Manual (Page 216)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
216
„ In the New Rule Properties dialog box, click the Authenticaion
Methods tab. Next, select “Kerberos” from the Authetication
method preference order and then click Edit.
‹ In the Edit Authentication Method Properties dialog box,
follow the steps below:
z Tick the box of “Use this string (preshared key)” and enter
“123456789” in the corresponding field.
z Click OK to complete the settings.
‹ Select “Preshared Key” from the Authentication method
preference order.
„ In the New Rule Properties dialog box, click the Tunnel Setting
tab:
‹ Select the radio box of “Tunnel endpoints are specified by
these IP addresses”.
‹ Specify the IPv4 tunnel endpoint, i.e., 211.22.22.22.
„ In
the New Rule Properties dialog box, click the Connection
Type tab:
‹ Tick the box of “All network connections”.
‹ Click
Apply.
‹ Click OK to complete the settings.
„ Select “VPN_B Remote To Local” from the IP Security rules.