PLANET MH-2300 - Manual (Page 25)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
25
2.2.1.5 Rebooting the MH-2300
Step 1. To reboot the MH-2300, go to System > Configuration > Settings
and set as shown below:
„ Under the Device Reboot section, click
at the
middle bottom of the screen.
„ A confirmation dialogue box appears and asks “Are you sure you
want to reboot the system?
„ Click OK to reboot or Cancel to abort.
Clicking the Button to Reboot the System
2.2.2 Date / Time
2.2.2.1 Setting the System Clock
Step 2. Under System > Configuration > Date/Time, set as shown below:
„ Configure the GMT offset.
„ Tick the box of Synchronize to an NTP server.
„ Type the IP address of the Internet time server in the Server IP or
Hostname field.
„ Set an interval time to update system clock.
„ Click
OK.
„
The System Clock Settings
1. Click Sync to synchronize the system clock with that on a local computer.
2. For assistance in configuring GMT offset and NTP sever, click Assist Me
next to the corresponding setting.