PLANET MH-2300 - Manual (Page 17)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
17
2.1.2 Permitted IPs
2.1.2.1 Adding a Permitted IP
Step 1. Under System > Administration > Permitted IPs, click New Entry and
then set as shown below:
„ Specify a name for the permitted IP.
„ Select
“IPv4” for IP Version.
„ Enter the IP address.
„ Enter the netmask. (“255.255.255.255” indicates a single IP
address)
„ Access by / via : Select Ping/ Tracert, HTTP and HTTPS.
„ Click
OK.
Adding a Permitted IPs
1. For Permitted IPs to be effective, it requires to uncheck the boxes of
Ping, HTTP, HTTPS, Telnet and SSH.
2. At least a permitted IP must be configured prior to the cancellation of
HTTP and HTTPS boxes; otherwise, the management interface will be
inaccessible.
2.1.3 Logout
2.1.3.1 Logging out the System
Step 1. Click Logout under System > Logout to prevent system from
unauthorized access or being tampered with.
Step 2.
Logging out the System