PLANET MH-2300 - Manual (Page 276)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
276
For Company A, set as shown below:
Step 1. Go to Policy Object > VPN > PPTP Server and then set as shown
below:
„ Click
the Modify button.
„ Tick
Enable PPTP.
„ Tick Encryption.
„ Tick Allow Internet access via and then select the port.
„ Auto-disconnect if idle for: type 0.
„ Enter
the Client IP – IP Range.
„ Click
OK.
Enabling the PPTP Server
1. The Internet access via PPTP VPN tunnel can be allowed or blocked when
connecting to the MH-2300 from an external network.
2. Auto-disconnect if idle for: The PPTP VPN tunnels can be specified an
idle timeout value (unit: minute) respectively to automatically disconnect.
3. To authenticate a PPTP VPN client using external RADIUS authentication
(refer to Chapter 8 for related configuration), click New Entry to define RADIUS
as the Authentication Type and add the client to the table under Policy Object
> VPN > PPTP Server.
Step 2. Go to Policy Object > VPN > PPTP Server and then set as shown