PLANET MH-2300 - Manual (Page 259)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
259
Step9. Go to Policy Object > VPN > Trunk, click New Entry and then set as
shown below:
„ Type the name in the Name field.
„ Local Settings: select LAN. Enter the local subnet and the mask.
„ Under
the Remote Settings section, select Remote IP / Netmask
and then enter the local subnet and the mask.
„ Move the VPN_01 from the Available Tunnels column to the
Selected Tunnels column.
„ Tick Enable NetBIOS Broadcast over VPN.
„ Click OK.
Configuring the First Trunk
First Trunk Completed