PLANET MH-2300 - Manual (Page 34)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
34
Step 2. The LAN subnets of 192.168.10.x/24, 192.168.20.x/24 and
192.168.1.x/24 are interconnected and are connected to the Internet
through MH-2300 via NAT.
The Deployment of Multiple LAN Subnets to Access the Internet via Routing
2.2.5 DHCP
2.2.5.1 Automatically Allocating IP Addresses to LAN PCs
Step 1. Go to System > Configuration > DHCP and then set as shown
below:
„ Select the radio box of “Enable DHCP”.
„ Untick the box of “Obtain DNS server address automatically”.
„ IPv4 DNS Server 1: Type an IP as the primary DNS Server.
„ IPv4 DNS Server 2: Type an IP as the secondary DNS Server.
„ IPv4 WINS Server 1: Type an IP as the primary WINS Server.
„ IPv4 WINS Server 2: Type an IP as the secondary WINS Server.
„ Lease Time :Type a lease time for the allocated IP addresses (24
hours by default).
„ Configure the following settings based on your LAN or DMZ
subnet:
‹ IPv4 Range 1 : Specify the first range of the IP pool (must be
within the same subnet). By default, it is between
192.168.1.2 and 192.168.1.254.
‹ IPv4 Range 2: Specify the second range of the IP pool (must
be within the same subnet and not repeated from those in
the first range).