PLANET MH-2300 - Manual (Page 238)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
238
Step 3. Remote Settings: Select “Remote Gateway (Static IP or Hostname)”,
and enter the gateway address of Company A.
Remote Settings
Step 4. Select “Pre-Shared Key” for Authentication Method, and enter a
Pre-Shared Key String. ( The maximum length of the string is 62
characters)
Authentication Method Settings
Step 5. In the Encryption and Data Integrity Algorithms section, select
“3DES” for Encryption Algorithm, select “SHA1” for Authentication
Algorithm; and then select “Diffie-Hellman 2” for Key Group.
Encryption and Data Integrity Algorithms
Step 6. Tick the radio box of “Use both algorithms” in the IPSec Settings
section, select “3DES” for Encryption Algorithm and “MD5” for
Authentication Algorithm.
IPSec Algorithm Settings
Step 7. In the Advanced Settings (optional) section, select “DH 1” for PFS
Key Group as well as enter “3600” in the ISAKMP SA Lifetime field
and “28800” in the IPSec SA Lifetime field.
Advanced Settings
Step 8. Select “Aggressive Mode” for IKE Negotiation as well as enter
“@abc123” in the Local ID field and “11.11.11.11” in the Peer ID field.
IKE Negotiation Settings