PLANET MH-2300 - Manual (Page 233)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
233
For A Company, set as shown below:
Step 1. Go to Policy Object > VPN > IPSec Autokey, and then click New
Entry.
The IPSec Autokey Rule Table
Step 2. Enter “VPN_A” in the Name field and select “Port2 (WAN1)” for
Interface.
Name and Interface Settings
Step 3. Select “Remote Gateway (Static IP or Hostname)” for Remote
Settings, and enter the gateway address of B Company.
Remote Settings
Step 4. Select “Pre-Shared Key” for Authentication Method, and enter a
Pre-Shared Key String. (The maximum length of the string is 62
characters.
Authentication Method Settings
Step 5. In the Encryption and Data Integrity Algorithms section, select
“3DES” for Encryption Algorithm; select “SHA1” for Authentication
Algorithm, and then select “Diffie-Hellman 2” for Key Group.
Encryption and Data Integrity Algorithms