PLANET MH-2300 - Manual (Page 10)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
10
The default encoding will be applied to the data of unspecified encoding.
Port Configuration
Step 1. Configure the LAN settings: (according to your network infrastructure).
„ Physical Connection: Select “Port1 (LAN1)”.
„ Interface Type: Select “LAN”.
„ Connection Type: Select “NAT Routing”.
„ Specify
the IPv4 Address and Netmask.
Configuring the LAN Interface Settings
The access to the management interface is subject to the LAN interface.
Therefore, enter the management address to a Web browser correspondingly if
any changes have been made to the LAN interface
.
Step 2. Configure the WAN Interface (please refer to your ISP for the details).
„ Select “Port 5 (WAN 1)” for Physical Connection.
„ Select “WAN” for Interface Type.
„ Select
your Connection Type.