PLANET MH-2300 - Manual (Page 283)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
283
Step 2. Under Policy Object > VPN > Trunk, click New Entry and then set as
shown below:
„ Specify a name for the VPN trunk.
„ Local Settings: Select “LAN” for Interface and specify the subnet
and netmask for Company B.
„ Remote Settings : Specify the subnet and netmask for Company
A.
„ Select “PPTP_Client_PPTP_01(61.11.11.11)” and
“PPTP_Client_PPTP_02 (61.22.22.22)” from the Available
Tunnels column on the left, and then click Add.
„ Tick the box of “Enable NetBIOS Broadcast over VPN”.
„ Click
OK to complete the settings.
Adding a VPN Trunk
VPN Trunk Successfully Added
When Remote IP Address / Netmask is used for Remote Settings, please refer
to available number of WAN addresses to add the corresponding amount of
PPTP VPN tunnels to the trunk setting.