PLANET MH-2300 - Manual (Page 177)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
177
A PPTP VPN connection is maintained using Echo-Request mechanism and
can be manually connected by ticking the box of “Manual connection” within the
PPTP client rule.
Terms in Trunk
Status
„ The description of the symbols used for connection status are as follows.
Symbol
Description Disconnected Connected
Name
„ The name of a trunk rule. Note that the name cannot be repeated under
Policy Object > VPN > Trunk.
Local Subnet
„ The IP address of source subnet.
Remote Subnet
„ The IP address of destination subnet.
Tunnel Selecton
„ The IPSec or PPTP tunnels that are included in the trunk.
Configuration
„ Click
Modify or Remove to edit or delete the corresponding rule.
The Trunk Rule Table
Once the Trunk Load Balancing is enabled, the VPN tunnels will be
load-balanced to increase the link speed. (Note that this feature requires two
units of the same model at both ends of a VPN connection to be activated, and is
also subject to the Load Balancing Mode specified under Network > Interface.)
Terms in Trunk Group
Name
„ The name of a trunk group. Note that the name cannot be repeated under
Policy Object > VPN > Trunk Group.