PLANET MH-2300 - Manual (Page 374)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
374
8.3.2 Traceroute
Step 1. Under Monitoring > Diagnostic Tools > Traceroute the Traceroute
command can be used by the MH-2300 to send out packets to a
specific address to diagnose the quality of the traversed network.
„ Destination IP / Domain name : Enter the destination address or
domain name for the packets.
„ Packet Size : Configure the size of each packet. (40 Bytes by
default)
„ Max Time-to-Live : Enter the maximum number of hops. (30 by
default)
„ Wait Time : Specify the duration to wait between successive pings.
(2 seconds by default)
„ Interface : Select the interface that the packets will originate from.
„ Click
OK.
The Parameters for Tracerouting a Host