PLANET MH-2300 - Manual (Page 49)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
49
the specific users by their IP address under System > Administration >
Permitted IPs.
3.1.1.3 Using MH-2300 as a Gateway to Manage the Internet
Access to Two LAN Subnets via NAT Routing Mode
Prerequisite Configuration (Note: The IP addresses are used as examples
only)
Configure Port1 as WAN1 (61.11.11.11) and connect it to the ADSL modem
(ATUR) to access the Internet.
Configure Port2 as LAN1 (192.168.1.1 in NAT Routing mode) and connect it to
the LAN subnet 192.168.20.x/24, which is translated to 61.11.11.11 (WAN1) for
providing LAN users with Internet access.
Configure Port3 as LAN2 (192.168.2.1 in NAT Routing mode) to connect it to
the LAN subnet 192.168.2.x/24, which is translated to 61.11.11.11 (WAN1) for
providing LAN users with Internet access.
The two LAN subnets are interconnected through network policies.