PLANET MH-2300 - Manual (Page 232)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
232
Step 7. IPSec VPN tunnel has been successfully established between the
MH-2300 and the Windows 7 PC.
The Deployment of an IPSec VPN Network between MH-2300 and Windows7 PC
4.8.1.3 Using Two Units of MH-2300 to Establish an IPSec VPN
Tunnel in Aggressive Mode
Prerequisite Configuration (Note: The IP addresses are used as examples
only)
Company A: Port 1 is defined as LAN 1 (192.168.10.1) and is connected to the
LAN subnet 192.168.10.x / 24.
Port 2 is defined as WAN 1 (61.11.11.11) and is connected to the
Internet via the ADSL modem (ATUR).
Company B: Port 1 is defined as LAN 1 (192.168.20.1) and is connected to the
LAN subnet 192.168.20.x / 24.
Port 2 is defined as WAN 1 (211.22.22.22) and is connected to the
Internet via the ADSL modem (ATUR).
This example will be using two units of MH-2300 to establish a VPN tunnel in
Aggressive mode as follows: