PLANET MH-2300 - Manual (Page 245)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
245
Step 9. The IPSec autokey rule “VPN_01” is successfully added.
IPSec Autokey Rule “VPN_01” Successfully Added
Step 10. Under Policy Object > VPN > IPSec Autokey, click New Entry.
The IPSec Autokey Rule Table
Step 11. Enter “VPN_02” in the Name field and select “Port3 (WAN2)” for
Interface.
Name and Interface Settings
Step 12. Remote Settings: Select “Remote Gateway (Static IP or
Hostname)” and enter the WAN 2 gateway address of Company B.
Configuring the Remote Settings
Step 13. Select “Pre-Shared Key”for Authentication Method and then type
the same key as previously specified.
The Authentication Method Settings
Step 14. Under the Encryption and Data Integrity
Algorithms section,
select “3DES” for Encryption Algorithm, “MD5” for Authentication
Algorithm and “Diffie-Hellman 1” for Key Group.
Encryption and Data Integrity Algorithms
Step 15. Under the IPSec Settings section, select the radio box of “Use both
algorithms”, and then select “3DES” for Encryption Algorithm and