PLANET MH-2300 - Manual (Page 189)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
189
Step 1. Go to Policy Object > VPN > IPSec Autokey and then click New
Entry.
The IPSec Autokey Rule Table
Step 2. Enter “VPN_A” in the Name field and then select “Port2 (WAN1)” for
Interface.
Name and Interface Settings
Step 3. Select “Remote Gateway or Client (Dynamic IP)” for Remote
Settings.
Remote Settings
Step 4. Select Pre-Shared Key from the Authentication Method drop-down
list, and enter a string. (The maximum length of the string is 62
characters.)
Authentication Method Settings
Step 5. In the Encryption and Data Integrity Algorithms section, select
“3DES” for Encryption Algorithm, select “MD5” for Authentication
Algorithm, and then select “Diffie-Hellman 2” for Key Group.
Encryption and Data Integrity Algorithms