PLANET WGSD-1022 - Manual (Page 85)

The authenticated port default is 1812
• Number of Retries Defines the number of transmitted requests sent to RADIUS server
before a failure occurs. The possible field values are 1 - 10.
Three is the default value.
• Timeout for Reply This defines the amount of the time in seconds the device waits for an
answer from the RADIUS server before retrying the query, or
switching to the next server.
The possible field values are 1 - 30.
Three is the default value.
• Dead Time This defines the amount of time (minutes) that a RADIUS server is
bypassed for service requests. The range is 0-2000.
The Dead Time default is 0 minutes.
• Key String This defines the default key string used for authenticating and
encrypting all RADIUS communications between the device and the
RADIUS server.
This key must match the RADIUS encryption.
• Source IP Address Defines the source IP address that is used for communication with
RADIUS servers.
• Usage Type Specifies the RADIUS server authentication type. The default value is
Login. The possible field values are:
• Login, indicates that the RADIUS server is used for
authenticating user name and passwords.
• 802.1X, indicates that the RADIUS server is used for 802.1X
authentication.
• All, where indicates that the RADIUS server is used for
authenticating user name and passwords, and 802.1X port
authentication.
Use the Add to Table button when you add the RADIUS configuration to the RADIUS Table at the
bottom of the screen.