14 show bridge address-table static, User guidelines, Example – PLANET WGSD-1022 User Manual
Page 145: Syntax, Default configuration, Command mode

User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
console# show bridge address-table
Aging time is 250 sec
vlan mac address port type
----- ------------------- ------ --------
1 0060.704C.73FF e8 dynamic
1 0060.708C.73FF e8 dynamic
200 0010.0D48.37FF e8 static
5.4.14 show bridge address-table static
The show bridge address-table static privileged EXEC command displays statically created entries in
the bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-channel-number]
vlan — Specific valid VLAN, such as VLAN 1.
interface — A valid Ethernet port.
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
console# show bridge address-table static
Aging time is 300 sec
vlan mac address port type