PLANET WGSD-1022 - Manual (Page 176)

console# clear counters ethernet g1
5.7.13 set interface active
The set interface active privileged EXEC mode command reactivates an interface that was suspended
by the system.
Syntax
set interface active {ethernet interface | port-channel port-channel-number}
ƒ interface — Valid Ethernet port.
ƒ port-channel-number — Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example activates interface e5, which is disabled.
console# set interface active ethernet e5
5.7.14 show interfaces configuration
The show interfaces configuration Privilege EXEC mode command displays the configuration for all
configured interfaces.
Syntax
show interfaces configuration [ethernet interface | port-channel port-channel-number | ]
ƒ Interface — Valid Ethernet port.
ƒ port-channel-number — Valid port-channel trunk index.
ƒ oob-interface — Out-of-band Ethernet port number.
Default Configuration
This command has no default configuration.