PLANET WGSD-1022 - Manual (Page 151)

console# clock source sntp
5.5.3 clock timezone
The clock timezone global configuration command sets the time zone for display purposes. To set the
time to Coordinated Universal Time (UTC), use the no form of this command.
Syntax
clock timezone hours-offset [minutes minutes-offset] [zone acronym ]
no clock timezone
ƒ hours-offse t— Hours difference from UTC. (Range: -12 – +13)
ƒ minutes minutes-offse t— Minutes difference from UTC. (Range: 0 – 59
ƒ zone acronym —The acronym of the time zone. (Range: Up to 4 characters)
Default Configuration
UTC
Command Mode
Global Configuration mode
User Guidelines
The system internally keeps time in UTC, so this command is used only for display purposes and when
the time is manually set.
Examples
The following example sets the timezone to 6 hours difference from UTC.
console# (config)# clock timezone -6 zone CST
5.5.4 clock summer-time
The clock summer-time global configuration command configures the system to automatically switch to
summer time (daylight saving time),. To configure the software to not automatically switch to summer
time, use the no form of this command.
Syntax
clock summer-time recurring {usa | eu | {week day month hh:mm week day month hh:mm}} [offset
offset] [zone acronym ]
clock summer-time date date month year hh:mm date month year hh:mm [offset offset] [zone