Product specification – PLANET WGSD-1022 User Manual
Page 17

Access through SNMPv1,v2c and v3 security set and get requests.
Four groups (history, statistics, alarms, and events) of embedded remote monitoring (RMON)
agents for network monitoring and traffic analysis
Built-in Trivial File Transfer Protocol (TFTP) client
Virtual Cable Test (VCT) technology provides the mechanism to detect and report potential
cabling issues, such as cable opens, cable shorts, etc. on Copper Links
EMI standards comply with FCC, CE class A,WEEE RoHS
Product Specification
Product
WGSD-1022
8-Port 10/100Mbps + 2 Gigabit TP / SFP combo Managed Ethernet Switch
Hardware Specification
Ports
8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
Gigabit ports
2 share 10/100/1000Base-T / SFP combo interfaces
Switch Processing
Scheme
Store-and-Forward
Switch fabric
5.6Gbps / Non-Blocking
Throughput
4.17Mpps / Wire-Speed
Address Table
8K entries
Share data Buffer
1 Mbit
Flow Control
Back pressure for Half-Duplex, IEEE 802.3x Pause Frame for Full-Duplex
Dimension (W x D x H)
267 x 170 x 45 mm, 1U height
Weight
1.2 KG
Power Requirement
100~240V AC, 50-60, Auto-sensing
Power Consumption
13.2 Watts / 45 BTU
Management Interface
Console. Telnet, SSH, Web, SSL, SNMP
Smart function
System Configuration
Console / Web / telnet interfaces
Port configuration
Port disable/enable. Auto-negotiation 10/100Mbps full and half duplex mode
selection. Flow control Disable / Enable. Bandwidth control on each port.
Port Status
Display each port’s speed duplex mode, link status, Flow control status. Auto
negotiation status, trunk status.
VLAN
IEEE 802.1Q Tagged Based VLAN ,up to 255 VLAN groups
Port trunking
Support 4 groups of 4-Port trunk support
QoS
Traffic classification based on Port Number, 802.1p priority, DS/TOS field in