PLANET WGSD-1022 - Manual (Page 190)

5.8.7 show gvrp configuration
The show gvrp configuration User EXEC command displays GVRP configuration information, including
timer values, whether GVRP and dynamic VLAN creation is enabled, and which ports are running GVRP.
Syntax
show gvrp configuration [ethernet interface | port-channel port-channel-number]
ƒ interface — A valid Ethernet interface.
ƒ port-channel-number — A valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to display GVRP configuration information:
Console# show gvrp configuration
GVRP Feature is currently enabled on the switch.
Maximum VLANs: 255,
Port(s) GVRP Registration Dynamic Timers Leave Leave
Status VLAN (milliseconds) All
Creation Join
-------- ------------- ---------------- --------------- --------------------- ---------------- -------------
e1 Enabled Normal Enabled 200 600 10000
e4 Enabled Normal Enabled 200 600 10000