PLANET WGSD-1022 - Manual (Page 240)

Example
The following example sets the authentication and encryption key for all RADIUS communications
between the
device and the RADIUS daemon to "abc-server".
Console (config)# radius-server key abc-server
5.18.3 radius-server retransmit
The radius-server retransmit global configuration command specifies the number of times the software
searches the list of RADIUS server hosts. To reset the default configuration, use the no form of this
command.
Syntax
radius-server retransmit retries
no radius-server retransmit
Default Configuration
The default is 3 attempts.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the number of times the software searches the list of RADIUS server
hosts to 5 attempts.
Console (config)# radius-server retransmit 5
5.18.4 radius-server source-ip
The radius-server source-ip global configuration command specifies the source IP address used for
communication with RADIUS servers. To return to the default, use the no form of this command.
Syntax
radius-server source-ip source
no radius-server-ip
ƒ source — Specifies the source IP address.