4 gvrp vlan-creation-forbid, 5 gvrp registration-forbid, Syntax – PLANET WGSD-1022 User Manual
Page 188: Default configuration, Command mode, User guidelines, Example

Console (config-if)# garp timer leave 900
5.8.4 gvrp vlan-creation-forbid
The gvrp vlan-creation-forbid interface configuration command enables or disables dynamic VLAN
creation. To disable dynamic VLAN creation, use the no form of this command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Default Configuration
By default, dynamic VLAN creation is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command forbids dynamic VLAN creation from the interface. The creation or modification of
dynamic VLAN registration entries as a result of the GVRP exchanges on an interface are restricted only
to those VLANs for which static VLAN registration exists.
Example
The following example disables dynamic VLAN creation on port e8.
Console (config)# interface ethernet e8
Console (config-if)# gvrp vlan-creation-forbid
5.8.5 gvrp registration-forbid
The gvrp registration-forbid interface configuration command de-registers all dynamic VLANs, and
prevents dynamic VLAN registration on the port. To allow dynamic registering for VLANs on a port, use
the no form of this command.
Syntax
gvrp registration-forbid
no gvrp registration-forbid
Default Configuration
Dynamic registering and deregistering for each VLAN on the port is allowed.