PLANET WGSD-1022 - Manual (Page 242)

5.18.6 radius-server deadtime
The radius-server deadtime global configuration command improves RADIUS response times when
servers are unavailable. The command is used to cause the unavailable servers to be skipped. To reset
the default value, use the no form of this command.
Syntax
radius-server deadtime deadtime
no radius-server deadtime
ƒ deadtime — Length of time in minutes, for which a RADIUS server is skipped over by transaction
requests. (Range: 0 - 2000)
Default Configuration
The default dead time is 0 minutes.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets a dead time where a RADIUS server is skipped over by transaction requests
for this period, to 10 minutes.
Console (config)# radius-server deadtime 10
5.18.7 show radius-servers
The show radius-servers user EXEC command displays the RADIUS server settings.
Syntax
show radius-servers
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.