PLANET WGSD-1022 - Manual (Page 288)

9 * * *
10 A-ARB3-LSA-NG.c-SEB.umnet.umich.edu (141.211.5.22) 58 msec 58 msec 58 msec
11 umaxp1.physics.lsa.umich.edu (141.211.101.64) 62 msec 63 msec 63 msec
The following table describes the significant fields shown in the display
Field Description
1 Indicates the sequence number of the router in the path to the host.
i2-gateway.stanford.edu Host name of this router.
192.68.191.83 IP address of this router.
1 msec 1 msec 1 msec Round-trip time for each of the probes that are sent.
The following table describes the characters that can appear in the traceroute command output.
Field Description
* The probe timed out.
? Unknown packet type.
A Administratively unreachable. Usually, this output indicates that an access
list is blocking traffic.
H Host unreachable.
N Network unreachable.
P Protocol unreachable.
Q Source quench.
U Port unreachable.
5.23.3 telnet
The telnet User EXEC command is used to log in to a host that supports Telnet.
Syntax
telnet ip-address | hostname [port] [keyword1......]
ƒ ip-address — IP address of the destination host. An out-of-band IP address can be specified as
described in the usage guidelines. (Range: 1 - 160 characters)
ƒ host — Hostname of the destination host (Range: Valid IP Address)
ƒ port — A decimal TCP port number, or one of the keywords from the ports table in the usage
guidelines. The default is the Telnet port (decimal23) on the host.